Strong stamping is not allowed, hammering the TIMKEN bearing directly is not allowed , and pressure is not allowed to be transmitted through the rolling elements.
Try to use special tools and avoid using things like cloth and short fibers.
Even if invisible dust enters the TIMKEN bearing, it will increase the wear, vibration and noise of the bearing.
When handling deep groove ball bearings directly with your hands, you must thoroughly wash off the sweat on your hands and apply high-quality mineral oil before operating them. Pay special attention to rust prevention in the rainy season and summer.
Under certain special operating conditions, deep groove ball bearings can achieve a longer life than traditional calculations, especially under light load conditions. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricating film and limit surface damage that may be caused by contaminants. In fact, under ideal conditions, the so-called permanent deep groove ball bearing life is not impossible.
(1) While accurately determining the radial and axial positions of the shaft, prevent shaft runout.
(2) Improve the rigidity of bearings. Bearings for the slave shafts of machine tools and deep groove ball bearings for the pinion gears of bicycle differential mechanisms.
(3) Prevent axial vibration and noise caused by resonance. Bearings for small motors.
(4) To prevent torsional sliding, orbital sliding and rotational sliding of rolling elements. High-speed torsional radial thrust bearings and thrust ball bearings.
(5) Remove the rings and keep the rolling elements in the correct position. When using thrust ball bearings and thrust spherical roller bearings on horizontal shafts.
